Search
Close this search box.
Search
Close this search box.

TrioMotion Coupler

The Flexslice system begins with the coupler. The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand.

Κατηγορία: Ετικέτες: ,

The Flexslice system begins with the coupler. The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand.

The bus coupler supports up to 16 input/output modules which have a positive mechanical lock and bus connector, making a reliable EBUS connection through the backplane. The complete assembly can be DIN rail mounted. The coupler converts the passing telegrams from Ethernet 100BASE-T to EBUS signal format.

P366

In the EtherCAT network, the P366 coupler can be installed in any position in the Ethernet string; making it suitable for operation close to the master or at a remote position.

Power supply requirement 24V DC, 0.8A min for full system
EtherCAT Connection RJ45
Protocol EtherCAT
Data rate 100 Mbit/s
Power Supply 24V / 1.5W
Isolation 1KV
EtherCAT refresh cycle ≥ 125us
Network Cable CAT5e min
Mounting DIN rail mount
Size (w x d x h) mm 17.2 x 147 x 107
Weight 160g
Connectors Push-in wiring terminals
EMC EN61000-6-2 (2005) Industrial Noise Immunity/ EN61000-6-4 (2007) Industrial Noise Emissions.
RoHs, CE, UL Compliant

Για περισσότερες πληροφορίες επικοινωνήστε μαζί μας στο
+30 694 502 1241
ή συμπληρώστε την παρακάτω φόρμα